1. Free standing
2. Ganging
3. Wall mount
4. Desk top
5. Portable

1. What is the total height (in Rack Units) of the equipment to be mounted?
2. What is the deepest dimension of your equipment?
3. Do you need space for future expansion?
4. Do you need rear rails?

1. Sides, tops, and doors are standard on some models, options on others, and not available on still other models.
2. A rear door may be needed to keep operators away from the connections on the back while a front door is not required. A different key is needed for front doors than rear doors for the same reason. The contractor wants to give the customer access to the face of the equipment, but doesn't want them “making adjustments” with the back of the equipment.
3. Solid steel, perforated and Plexiglas front doors available.

Is each piece of equipment rack mountable or do you need shelves?

1. See SH Series of shelves.

Will you need rack mounted electronic accessories?

1. AC power strips and power panels?
2. Monitor panels?
3. Sequential switching?

1. Perforated doors?
2. Vented blank panels?
3. Top mounted fans?
4. Panel mounted fans?
5. Air filter?

1. Blank panels
2. Vented panels
3. Shelves
4. Drawers

1. Floor Standing
   1. Mobile
      1. RX1 Series - Constructed in same fashion as 200 Series.
         1. 24", 14 rack units
         2. 36", 21 rack units
      2. Caster addition to standard rack yields mobility. Casters and handles included in the RX1 Series!
   2. Knocked Down - Save on shipping cost, but increased labor cost
      1. 900 Series
   3. Welded
      1. 100 Series - Economy, entry level. Fixed rails; rear rails cannot be installed; rear door standard, front door optional.
      2. 200 Series - (18.5" deep) Adjustable rails, rear rails optional; rear door standard
      3. 200 Series - (25.5" deep) Adjustable rails, rear rails optional; Rear door standard
      4. 500 Series - Ganging capable if desired, includes rear door, sides sold separately
         1. 25" deep
         2. 30" deep (Incl. Rear Rails)
      5. 700 Series - Heavy-duty 14 gauge CRS; sides, top, and doors sold separately; two pair threaded rail standard; ganging capable if desired
         1. 25.5" deep (Ex. 744-25)
         2. 30" deep (Ex. 744-30)
         3. 36” deep   (Ex. 744-36)
      6. FMA Series - Our Top Of The Line Gangable/Stand Alone Rack System Features Movable Front And Rear Rail, Unique Form And Function
         1. Stand Alone Rack 25.5" Deep
         2. Gangable Rack 25.5" Deep
         3. Gangable Rack 36" Deep
   4. Open
      1. 900 Series - Stackable Utility Frames-shipped knocked down
      2. Both the 500 and 700 Series racks can be "open" w/o sides
   
   
2. Wall Mount
   1. 300 Series - Sectional Wall Cabinets - 4" deep rear section, 2" deep front door standard
      1. 12" Center section - 300 Series (Ex. 324-12)
      2. 15" Center section - 300 Series (Ex. 324-15)
      3. 18" Center section - WMA Series (Ex. WMA10-23)
   2. 600-12 - One size only, 7 rack units; locking front door.
   3. AWR Series - Tilt-out Cabinets; can be flush-mounted or surface-mounted.
      1. 2 rack units
      2. 3 rack units
   4. WME150 - Knockdown wall rack w/locking door; easy to assemble; variety of configurations; no rack rails.
   
   
3. Desk Top
   1. 400 Series - Welded and assembled; doors sold separately
   2. 900 Series - economy knockdown (No sides or top)
   3. RKW Series - MDF wood veneer with 1 pair rack rails
   
   
4. Accessories
   1. Shelves
   2. Drawers
   3. Fans - Rail mounted, side mounted, or top mounted; and filtered.
   4. Blank Panels - Flush or recessed; solid, vented, or louvered.
   5. Castors & Levelers
   6. Electronics - Power strips, sequencers, thermostats, monitor panels, and a work light.
   7. Writing surfaces